FlowCast Tote Set
FlowCast Tote Set will be the new generation of clear casting resin. It's thinner and clearer than the traditional clear resins. It is translucent and looks like liquid glass. When it is hardened it transforms into crystal-clear. It is also recyclable and colored using epoxy.
EcoPoxy FlowCast(r), Casting Epoxy
FlowCast(r) is an epoxy with two components that cures to a crystal-clear finish. It is highly compatible with a range of substrates, and has enhanced UV stability as well as low exothermic heat accumulation. EcoPoxy's Metallic Color Pigments as well as Liquid Color Pigments work with epoxy. The epoxy's low viscosity make it quick and easy to use. After it has cured it can be finished with EcoPoxy's standard finishing techniques.
It is essential to follow the directions of the manufacturer when working with epoxy. You must mix the resin and hardener in proper proportions. The ratio is typically 2:1 or 4:1. Mixing the ingredients is a good idea prior to you pour.
It takes 72 hours for treat
The FlowCast Tote Set is made of tough, flexible and sustainable EcoPoxy resin. It cures in a 72-hour time frame and resists stress cracking. It can be colored using EcoPoxy pigments. FlowCast is perfect for casting and encapsulation applications, and its see-through properties make objects appear larger inside. For safety, Axminster recommends wearing a FFP2 respirator and eye protection while using the product.
FlowCast's two-component epoxy formula has outstanding water-clear properties. It is compatible with most substrates and has improved UV stability. It also has low exothermic heat accumulation. It can also be utilized in conjunction with EcoPoxy Metallic Color Pigments or Liquid Color Pigments. The ratio of hardener to resin is 2:1. Deviating from this ratio could lead to lower mechanical properties as well as an incomplete cure.
It's simple to use
FlowCast is a two-component epoxy, is very easy to work with. It is simple to use and comes with excellent air release properties. It is a solid which is crystal clear and is resistant to stress cracking. It is perfect for deep pouring applications. It is safe, and it leaves almost no odour after mixing.
FlowCast can be used with tools for woodworking as also a belt sander. It is a durable heat resistance, low viscosity and high bio-based carbon content. It is ideal for casting and see through Encapsulation. It is ideal to display the items inside. If you intend to work with FlowCast it is recommended to wear a respirator and eye protection when sanding it.
Address-: 343 Hercules Rd, Emigrant, MT 59027, United States
Phone:- +14062238330
.